Underwater Housing for Nikon COOLPIX P7700
A full featured and durable waterproof housing for Nikon P7700 cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.
The True TTL Advantage
TTL or "Through-The-Lens" flash metering means the strobe interprets information from the camera to control flash duration and properly expose an image. TTL may be accomplished directly through electrical signals from the camera, or indirectly through watching the behavior of the camera's built-in flash.
Circuitry built into this housing allows the camera to communicate directly with compatible underwater strobes (see Strobe Compatibility section below). When connected via this circuitry, the camera learns that an external flash is attached and is able to more accurately adjust exposure by knowing this. The camera's flash will not fire, eliminating the shutter lag associated with waiting for the camera's flash to recycle.
Sync Cord Connections
The Ikelite-style electrical bulkhead is widely recognized as the most reliable waterproof strobe sync connection available. In order to communicate with the camera, compatible Ikelite DS strobes must be connected to the housing's electrical bulkhead using a single or dual TTL sync cord.
Non-Ikelite strobes may be connected to this bulkhead using a compatible sync cord, however the housing's circuitry will not receive power and the strobes will operate in manual exposure modes only.
Whether in TTL or manual exposure, use of an electrical sync cord eliminates the issues of signal interference, inconsistent exposure due to weak fiber optic transmission, and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off. Sync cords are comparably priced to fiber optic cords and are equally durable.
Construction
Durable polycarbonate and acrylic construction provides a unique view of the camera to ensure correct waterproof installation and confidence underwater. Simply close the two stainless steel locking lid snaps, and see the o-ring form a solid black, watertight seal. Large, ergonomic controls provide access to all important camera functions including front and rear dials. An included tray with soft-grip handle provides comfortable handling underwater and our signature quick release attachment system for lighting accessories.
Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.
Wide Angle, Macro + Filters
The housing port is designed to accept color filter, wide angle, and macro options for 3.9-inch diameter ports. Light is absorbed very quickly as it passes through water. A subject will look darker, less colorful and somewhat grainy when viewed through even a few feet of water. The addition of a compatible wide angle accessory expands the camera's field of view underwater, providing the opportunity to get as close as possible to the subject and reduce the amount of water light passes through. The results speak for themselves - photos with the best color, exposure and clarity possible.
Specifications
200 ft (60m) depth rating
Controls for all camera functions except Fn button and Flash pop-up button
Ikelite 5-pin bulkhead with TTL circuitry
Near neutral buoyancy in fresh water
Tray mounts with 3/8-16 bolts with 3 in spacing (76mm)
Weight 4.7 lb (2.1 kg)
Dimensions 7.4 x 6.4 x 7.0 in (19 x 16 x 18 cm) including projections
3.9-inch (99 mm) diameter glass lens port
In the Box
Housing
O-ring # 0110
Port cover # 0200.08
Waterproof bulkhead cap # 9104.5
Tray with quick release handle # 9523.63
Silicone lubricant 1cc tube
1 year limited warranty
Documentation