![Underwater Housing for Canon PowerShot G1 X Mark II](http://www.ikelite.com/cdn/shop/products/6146.02-canon-g1x-mark-ii-a.jpg?v=1492358770&width=1500)
![Underwater Housing for Canon PowerShot G1 X Mark II](http://www.ikelite.com/cdn/shop/products/6146.02-canon-g1x-mark-ii-b.jpg?v=1492358773&width=1500)
![Underwater Housing for Canon PowerShot G1 X Mark II](http://www.ikelite.com/cdn/shop/products/6146.02-canon-g1x-mark-ii-c.jpg?v=1492358777&width=1500)
![Underwater Housing for Canon PowerShot G1 X Mark II](http://www.ikelite.com/cdn/shop/products/6146.02-canon-g1x-mark-ii-d.jpg?v=1492358780&width=1500)
Underwater Housing for Canon PowerShot G1 X Mark II
This housing is out of stock and permanently out of production. We have no remaining new, blemished, or used inventory. This product has been replaced with the fully updated Underwater TTL Housing for Canon PowerShot G1X Mark II (Updated). We continue to provide service of this product even though it has been discontinued.
True Canon TTL Exposure
TTL or "Through-The-Lens" flash metering means the strobe interprets information from the camera to control flash duration and properly expose an image. TTL may be accomplished directly through electrical signals from the camera, or indirectly through watching the behavior of the camera's built-in flash.
Circuitry built into this housing allows the camera to communicate directly with compatible underwater strobes (see Strobe Compatibility section below). When connected via this circuitry, the camera learns that an external flash is attached and is able to more accurately adjust exposure by knowing this. The camera's flash will not fire, eliminating the shutter lag associated with waiting for the camera's flash to recycle.
Sync Cord Connections
The Ikelite-style electrical bulkhead is widely recognized as the most reliable waterproof strobe sync connection available. In order to communicate with the camera, compatible Ikelite DS strobes must be connected to the housing's electrical bulkhead using a single or dual TTL sync cord.
Non-Ikelite strobes may be connected to this bulkhead using a compatible sync cord, however the housing's circuitry will not receive power and the strobes will operate in manual exposure modes only.
Whether in TTL or manual exposure, use of an electrical sync cord eliminates the issues of signal interference, inconsistent exposure due to weak fiber optic transmission, and false triggering caused by light rays bouncing off the water's surface or your buddy's flash going off. Sync cords are comparably priced to fiber optic cords and are equally durable.
Fiber Optic Connections
Two ports are provided for the connection of up to two Ikelite-, SEA&SEA-, or Olympus-type fiber optic cords. The housing's built-in TTL circuitry will not be operable when external strobes are attached via fiber optic cord. Refer to the Flash via Sync Cord section for information on utilizing the built-in TTL circuitry.
Wide Angle & Macro
The housing port is designed to accept color filter, wide angle, and macro options for 3.9-inch diameter ports. Light is absorbed very quickly as it passes through water. A subject will look darker, less colorful and somewhat grainy when viewed through even a few feet of water. The addition of a compatible wide angle accessory expands the camera's field of view underwater, providing the opportunity to get as close as possible to the subject and reduce the amount of water light passes through. The results speak for themselves - photos with the best color, exposure and clarity possible.
Construction
Durable polycarbonate and acrylic construction provides a unique view of the camera to ensure correct waterproof installation and confidence underwater. Simply close the two stainless steel locking lid snaps, and see the o-ring form a solid black, watertight seal. An included tray with soft-grip handle provides comfortable handling underwater and our signature quick release attachment system for lighting accessories.
Large, ergonomic controls provide access to all important camera functions including customizable controls, front and rear dials. Video recording start/stop can be activated smoothly with your thumb via a control lever on the side of the housing.
Ikelite products are designed, built and tested in the USA. We use locally sourced, top-grade materials. Our housings are built by hand and individually tested for fit, function and waterproof integrity. We back our products with over 50 years of experience and service within the dive industry.
Important Notice
The Canon Enhanced Grip GR-DC1A cannot be used in this installation, as the thickness of this grip interferes with gearing necessary to drive the camera's front control ring. Please note that some European models may be shipped with the larger "Enhanced Grip" and that this grip must be removed prior to installation. Cameras featuring the "standard" grip as shown on the Canon USA website may be used without modification.
Specifications
200 ft (60m) depth rating
Controls for all camera functions except Flash switch
Ikelite 5-pin bulkhead with TTL circuitry
Slightly negative buoyancy in fresh water
Canon Grip GR-DC1A not supported due to interference with the front control dial; Grip must be removed prior to installation
4.7 lb (2.1 kg)
7.4 x 6.4 x 7.3" (188 x 157 x 185 mm)
3.9" diameter glass lens port
In the Box
Housing
Rear o-ring # 0110
Tray with Quick Release Handle # 9523.63
Vinyl port cover # 0200.08
Waterproof bulkhead cap # 9104.5
Flash diffuser
Flash deflector
1 year limited warranty
Documentation
![Underwater Housing for Canon PowerShot G1 X Mark II](http://www.ikelite.com/cdn/shop/products/6146.02-canon-g1x-mark-ii-a.jpg?v=1492358770&width=1500)