Housings
Setting Up Your Housing
This collection of videos walks you through installing your camera in the related underwater housing and making any necessary settings changes.
Accessories
Adding Accessories to Your Housing
These items will make your underwater photography experience more enjoyable and allow you to customize your experience.
Adding a USB-C Charging & Data Transfer Bulkhead
Set it and forget it! Charge and offload data without removing your camera from the housing.
Adding a GoPro To Your Housing
Don't leave your GoPro behind just because you upgraded your camera rig. Catch some extra video on the fly by using one of our GoPro mounts.
Installing a Trigger Extension
If you're using a tray with dual handles, you'll want to extend your shutter and back button focus levers to be easily reached with your hand on the handle.
Adding a Trim Weight System for Balance and Stability
Our 8" Diameter Dome is made out of the lightest materials available to reduce travel weight. Use a Trim Weight to balance it out.
Installing a Magnifying Viewfinder
Get a bigger, brighter view of your camera's optical or electronic viewfinder.
Installing a Vacuum Leak Detection System
A vacuum system allows you to check your housing for leaks BEFORE you get in the water.
Adding an M24 Port for HDMI 2.0 Monitor Bulkheads
Select housings support the addition of this large-bore port for Nauticam HDMI 2.0 accessories.
Strobes
Lighting is an important element to your underwater photography. Find out everything you need to know about adding strobes to your system.
Have more questions?
DS50, DS51 Strobes
DS160, DS161 Strobes
DS230, DS232 Strobes
Sync Cords & TTL Operation
Wiring Diagrams and Test Firing Strobes
Common Questions About Strobe Firing, TTL, and Sync Speeds
New Auto-Switching Hotshoe and Bulkhead Updates Starting January 1, 2025
How to Care for Your Sync Cord Plug
Mixing Two Strobes of Different Sizes
Material Change for Bulkheads & Sync Cord Plugs
TTL for Canon Cameras
TTL for OM System, Olympus & Panasonic Cameras
New Auto-Switching Hotshoe and Bulkhead Updates Starting January 1, 2025
Learn about the advantages of the new system and how it affects compatibility with existing housings and strobe accessories.
Maintenance
Your Ikelite products are designed to operate in the harshest conditions on Earth. Keep up with a good maintenance regime for many years of trouble-free operation.
DL Housings DO's and DON'Ts
Avoid these these expensive mistakes when setting up your 50DL or 200DL underwater housing.
Using a Vacuum Leak Detection System
Why wait until you get in the water to look for a leak? Use a vacuum system to check your housing.
Lubricating an ULTRAcompact Housing O-Ring
Have a TG-series camera or other compact digital still? If your housing has a hinged back door, this is the video for you.
Removing Scratches from a Dome Port
With a careful hand you can use NOVUS polish to remove light scratches from your acrylic dome.
Maintaining Sync Cord Plug O-Rings
Electrical sync cords can provide more reliable strobe triggering than fiber optic when maintained properly.
Replacing Control Gland Seals
Most users return their housing for annual service. If you need an emergency field fix, here's how to do it.
Replacing Push Button O-Rings
If your push buttons are getting sticky, it's best to send the housing to us. Or DIY-types can use or push button o-ring kit.
David Fleetham's DL Housing Assembly Tips
The most published underwater photographer of all time shows you how he keeps his housing in tip top shape.
![Sony a6700 Setting it Up // 200DLM/E Underwater Housing [VIDEO]](http://www.ikelite.com/cdn/shop/articles/Sony_a6700_Assembly_copy_1.jpg?v=1714080189&width=2000)
Sony a6700 Setting it Up // 200DLM/E Underwater Housing [VIDEO]
Learn about how you're going to hold onto it underwater, how to install your camera, and how to check for leaks before entering the water.
![Sony a9 III // Setting It Up 200DL Underwater Housing [VIDEO]](http://www.ikelite.com/cdn/shop/articles/sony-a9-iii-ikelite-housing-assembly_9b663b3d-52fb-4ccb-9804-02dabd3d35de.jpg?v=1739462927&width=2000)
Sony a9 III // Setting It Up 200DL Underwater Housing [VIDEO]
Are you ready to take global shutter underwater for the first time in a mirrorless camera? John shows you how to set up a full featured underwater housing designed and built for the Sony a9 III.
Canon RF 24-105mm f/4L NEW Zoom Gear Assembly // 200DL Underwater Housing
Mike Rabideau shows you the important points you need to know when installing the zoom gear for the 24-105mm lens for use in a compatible Ikelite 200DL Underwater Housing.
![Canon RF 24-70mm Zoom Gear Assembly // 200DL Underwater Housing [VIDEO]](http://www.ikelite.com/cdn/shop/articles/canon-rf-24-70mm-lens-zoom-gear-installation.jpg?v=1738781572&width=2000)
Canon RF 24-70mm Zoom Gear Assembly // 200DL Underwater Housing [VIDEO]
Learn how to correctly orient and install the compatible gear ring to provide zoom operation when you use this lens with your Ikelite 200DL Underwater Housing.
Customizing the Dial Functions on a Sony Mirrorless Camera for Underwater Use [VIDEO]
Logan shows you how to customize the exposure dials on a Sony camera for even more ergonomic access underwater.
![TT5 Canon TTL Fiber Optic Transmitter // Setting it Up [VIDEO]](http://www.ikelite.com/cdn/shop/articles/tt5-ikelite-canon-ttl-fiber-optic-transmitter.jpg?v=1711078682&width=2000)
TT5 Canon TTL Fiber Optic Transmitter // Setting it Up [VIDEO]
Now you can enjoy the most reliable Canon TTL strobe exposure with a fiber optic connection between your Ikelite housing and DS strobes.
USB-C Compatibility Info for Nikon Z8 Underwater Housings
The USB-C Bulkhead is a must-have accessory for your underwater housing. There are a few things you need to know if you plan to use it with a Nikon Z8 camera.
USB-C Compatibility Update for Sony Alpha A7 III, A7R III, A9 Underwater Housings
The 200DL Underwater Housing for Sony Alpha a7 III and a7R III mirrorless cameras was released before we started offering M16 threaded accessories. A running change was made to this model to suppor...